
Figure 78. Cabling diagram—3.5 inch (x8) SAS/SATA backplane—PowerEdge R730 (option 2)
1. | 2. backplane signal connector 1 | |
3. | system board | 4. SAS A connector on the system board |
5.SAS B connector on the system board
Next steps
1.Replace the
2.Follow the procedure listed in After working inside your system.
Removing the hard-drive backplane (R730xd)
Prerequisites
1.Ensure that you read the Safety instructions.
2.Follow the procedure listed in Before working inside your system.
3.Remove the cooling shroud.
152