Figure 97. Removing and installing the I/O panel —PowerEdge R730xd
1. | I/O panel cable | 2. | |
3. | screw (3) | 4. | I/O panel |
5.chassis
Next steps
1.Replace the I/O panel. See Installing the I/O panel (R730xd).
2.Follow the procedure listed in After working inside your system.
Installing the I/O panel (R730xd)
Prerequisites
1.Ensure that you read the Safety instructions.
2.Follow the procedure listed in Before working inside your system.
3.Keep the T15 Torx screwdriver handy.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
178
