Dell R730xd Removing the vFlash media unit, Removing and installing the SD vFlash media card

Figure 91. Removing and installing the SD vFlash media card

1. SD vFlash media card 2. SD vFlash media-card slot

3.To install an SD vFlash media card, with the label side facing up, insert the contact-pin end of the SD vFlash media card into the card slot on the module.

NOTE: The slot is keyed to ensure correct insertion of the card.

4.Press the card inward to lock it into the slot.

Removing the vFlash media unit

Prerequisites

1.Ensure that you read the Safety instructions.

2.Follow the procedure listed in Before working inside your system.

NOTE: This procedure applies only to PowerEdge R730xd systems.

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

Steps

1.Remove the screw securing the vFlash media unit to the chassis.

2.Remove the cable from the vFlash media unit and the backplane.

3.Slide the vFlash media unit toward the front of chassis and lift it out of the system.

169