Steps
1.Slide in and align the vFlash media unit with the vFlash media slot on the back of the chassis.
2.Connect the cable to the vFlash media unit.
3.Replace the screw securing the vFlash media unit to the chassis.
Next steps
Follow the procedure listed in After working inside your system.
Control panel assembly
Removing the control panel (R730)
Prerequisites
1.Ensure that you read the Safety instructions.
2.Follow the procedure listed in Before working inside your system.
3.Keep the #2 Phillips screwdriver handy.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
Steps
1.Using a #2 Phillips screwdriver, remove the screw(s) securing the control panel to the chassis.
CAUTION: Do not use excessive force when removing the control panel as it can damage the connectors.
2.From inside the system, push the control panel out of the chassis.
3.Remove all the cables connecting the control panel to the chassis.
171
