Condition | |
|
|
Blinks green two times per second | Identifying drive or preparing for removal. |
Off | Drive ready for insertion or removal. |
| NOTE: The drive status indicator remains off until |
| all hard drives are initialized after the system is |
| turned on. Drives are not ready for insertion or |
| removal during this time. |
Blinks green, amber, and turns off | Predicted drive failure |
Blinks amber four times per second | Drive failed |
Blinks green slowly | Drive rebuilding |
Steady green | Drive online |
Blinks green three seconds, amber three | Rebuild aborted |
seconds, and turns off six seconds |
|
iDRAC Direct LED indicator codes
NOTE: The iDRAC Direct LED indicator does not light up for the USB mode.
Figure 9. iDRAC Direct LED indicator
1.iDRAC Direct status indicator
The table below displays iDRAC Direct activity when configuring iDRAC Direct by using the management port (USB XML Import).
Convention | iDRAC Direct | Condition |
| LED indicator |
|
| pattern |
|
|
|
|
A | Green | Lights green for a minimum of 2 seconds at the beginning and end |
|
| of a file transfer. |
B | Flashing green | Indicates file transfer or any operation tasks. |
21
