Menu Item

Description

Logical Processor Enables or disables the operating system capability to put logical processors in the

Idlingidling state in order to reduce power consumption. By default, the option is set to Disabled.

Configurable TDP Allows reconfiguration of Thermal Design Power (TDP) to lower levels.

TDP refers to the maximum amount of power the cooling system is required to dissipate.

X2Apic Mode

Dell Controlled Turbo

Number of Cores per Processor

Processor 64-bit Support

Processor Core Speed

Processor 1

Enables or disables the X2Apic mode.

NOTE: Depending on the number of installed CPUs, there may be up to four processor listings.

Controls the turbo engagement. Enable this option only when System Profile is set to Performance.

Controls the number of enabled cores in each processor. By default, the Number of Cores per Processor option is set to All.

Specifies if the processor(s) support 64-bit extensions.

Displays the maximum core frequency of the processor.

NOTE: Depending on the number of installed CPUs, there may be up to four processor listings. The following settings are displayed for each processor installed in the system.

Family-Model- Displays the family, model and stepping of the processor as defined by Intel. Stepping

Brand

Displays the brand name reported by the processor.

Level 2 Cache Displays the total L2 cache.

Level 3 Cache Displays the total L3 cache.

Number of Cores Displays the number of cores per processor.

SATA Settings screen details

You can use the SATA Settings screen to view the SATA settings of SATA devices and enable RAID on your system.

You can view the SATA Settings screen by clicking System Setup Main Menu System BIOS SATA Settings.

The SATA Settings screen details are explained below.

39

Page 39
Image 39
Dell R730xd owner manual Sata Settings screen details