Chapter 3 Creating and Editing Screens
3-176 Revision May, 2010
Property Description of X-Y Distrubution Elements
Control
The address can be internal memory or the
controller address. (Please refer to Table 3.2.2
Property Description of General Buttons.). The user
can set the function is to sample or clear.
When BIT 0 is turned ON (OFF ON)→, it indicates
that HMI will read the sampling points.
When BIT 1 is turned ON (OFF ON)→, it indicates
that HMI will clear the sampling points.
Auto Clear
When this option is selected, HMI will disable the
control address (ON→OFF) after reading the
sampling points.
Continuous
Address
When this option is selected, the system will regard
read address X as the starting address and
designate the consecutive read addresses from
read address X automatically. Doing this can save
the communication time of the controller.
For example, when read address X is set to
1@D301, if this option is selected, HMI will take
1@D302 as read address Y, 1@D303 as color
address, 1@D304 as conjunction address. If this
option is not selected, they can be specified to
other kinds of addresses.
Read Address X
The address can be internal memory or the
controller address. (Please refer to Table 3.2.2
Property Description of General Buttons.)
When the data is read, it will be converted to X
distribution points and display on the screen.
Read Address Y
The address can be internal memory or the
controller address. (Please refer to Table 3.2.2
Property Description of General Buttons.)
When the data is read, it will be converted to Y
distribution points and display on the screen.
Setting
Color
Used to determine the color of the sampling points
(distribution points). It can be an internal memory,
PLC address or constant. The range is from
0~65535.