Chapter 4 Examples
Then, user’s HMI screen will look like the figure shown below. As the default value of RCPG is 0
and RCPNO is 1, the value of history buffer RCP0~RCP4 and recipe table RCP5~RCP19 will be
shown as 0. At this time, the recipe data has not been written into PLC address
1@D100~1@D108. Therefore, the display values of 1@D100~1@D108 are all 0.
Set RCPG=2, the recipe table RCP5~RCP19 will display the data of the 2nd group of the recipes
and the history buffer RCP0~RCP4 will display the data of the 1st group of the recipes. The HMI
screen will be shown as the figure below.
At this time, the recipe data has not been written into PLC addresses 1@D100~1@D108,
therefore, the display value will be 0 still.
Revision May, 2010 4-9