Chapter 3 Creating and Editing Screens
# (Comment)
Equation
# Statement
Explanation
This command is used to insert macro descriptions and make the macro readable.
Using this command will not affect the macro function. The user only need to put #
symbol in front of the equation and the macro will become readable. To change the
comment to be back to the equation, just remove the # symbol.
Remark
Statement can be a string of texts or macro commands.
Example
When the comment is a string of texts:
When the comment is a string of macro commands:
Delay (System Delay)
Equation
Delay (Var1)
Explanation
This command is used to delay the user setting time by system. Because DOP-B series
HMI is a multiplexer system, a system delay may occur. Therefore, time set will be
increased due to a System Busy condition and the condition that setting the time
forward will not happen. Please note that too long delay time may result in slow
response of HMI. The unit of delayed time is ms.
Remark
Var1 can be internal memory or constant.
After Delay command is executed, HMI will stop the operation. The operation
will resume after the delay time has elapsed (expired).
Example
Delay two seconds.
Revision May, 2010 3-371