Chapter 3 Creating and Editing Screens
Clearing History Buffer Register (HBCR)
The history buffer when controlled by a PLC can also be cleared by the PLC.
Corresponding Flag
Corresponding
Buffer Area Bit Binary Display of Relative
Position (x) Function
Buffer Area 1 0 0000 0000 0000 000x Clearing History Buffer Flag 1
Buffer Area 2 1 0000 0000 0000 00x0 Clearing History Buffer Flag 2
Buffer Area 3 2 0000 0000 0000 0x00 Clearing History Buffer Flag 3
Buffer Area 4 3 0000 0000 0000 x000 Clearing History Buffer Flag 4
Buffer Area 5 4 0000 0000 000x 0000 Clearing History Buffer Flag 5
Buffer Area 6 5 0000 0000 00x0 0000 Clearing History Buffer Flag 6
Buffer Area 7 6 0000 0000 0x00 0000 Clearing History Buffer Flag 7
Buffer Area 8 7 0000 0000 x000 0000 Clearing History Buffer Flag 8
Buffer Area 9 8 0000 000x 0000 0000 Clearing History Buffer Flag 9
Buffer Area 10 9 0000 00x0 0000 0000 Clearing History Buffer Flag 10
Buffer Area 11 10 0000 0x00 0000 0000 Clearing History Buffer Flag 11
Buffer Area 12 11 0000 x000 0000 0000 Clearing History Buffer Flag 12
12-15 xxxx 0000 0000 0000 Reserved
Clearing History Buffer Flag
Bits 0 to 11 clear the history buffer. When this flag is turned ON, HMI clears the history
buffer one time. To control the clearing history buffer flag again, this flag must be
turned OFF and then ON again.
Recipe Control Register (RECR)
Bit Binary Display of Relative
Position (x) Function
0 0000 0000 0000 000x Change Recipe Number Flag
1 0000 0000 0000 00x0 Read Recipe Flag (PLC → HMI):
Read recipe data from PLC and store it in HMI
2 0000 0000 0000 0x00 Write Recipe Flag (PLC ← HMI)
Write recipe data from HMI into PLC
3 0000 0000 0000 x000 Change Recipe Group Number Flag
4-7 0000 0000 xxxx 0000 Reserved
8-15 xxxx xxxx 0000 0000 Designate Recipe Group Number
Change Recipe Number Flag
To change recipe number, the user can use Recipe Number Register RCPNO directly or
use this flag. To specify the recipe number, write the recipe number into the Recipe
Number Designation Register (RBIR) and then turn ON this flag (Bit 0). After the above
3-32 Revision May, 2010