Chapter 3 Creating and Editing Screens
Default tab in Configuration option
Blink Time Specify the default element blink rate when creating an
element. The range is between 00 ~ 5000ms。
Element
Default
Value
Scroll Size
(if element has
Scroll Size)
(Customer will enter text here)
This option is available for the element that has scroll
function, e.g. Alarm History Table, etc. There are 20
pixels, 30 pixels and 40 pixels three options. The default
setting is 20 pixels.
Other tab in Configuration option
Enable touch cursor
When this option is enabled, the HMI mouse function is
activated. When touching HMI screen, a mouse will
display on the screen for the user to use.
It will display initial
screen at start
When this option is enabled, the default startup screen
will display when HMI is powered on and started up.
General Setting
Blue Led mode
This option determines when the blue LED indicator will
be lit. There are three options: none (not be lit), COM
(during communication), Access data (when
accessing data) and Ethernet (communicating via
Etherent).
3-234 Revision May, 2010