Chapter 4 Examples
Click Options > Recipe, it can open Recipe Setup dialog box. Enable the recipe function and set
the non-volatile area to HMI. In this example, the Length is set to 5, Group is set to 3 and
Address is set to 1@D100. After pressing Input button, the user’s screen will look like the figure
shown below.
Then, press OK button to complete the Recipe settings.
Next, click Options > Configuration, select Control B lock tab. To control the read and write
operation of recipes, in this example, Control Address is set to 1@D0 and the Length is set to 8 .
After complete the above settings, the user’s screen will look like the figure shown below.
4-2 Revision May, 2010