Delta Electronics DUP-B Chapter 2 Working with Hardware Devices

Chapter 2 Working with Hardware Devices

SD card (supports SDHC) can be used to save and transmit data. The supporting file

format is FAT32. Before using a SD card, reformatting (FAT32) via HMI is needed. Only SD

card that formatted by HMI can be used on both HMI and Windows® OS system. (Even it

can be read/written in some format, but faults may occur due to different format among

Win95/98/2000/XP versions)

USB disk can be used to save data. It also can be used to copy data from HMI and its

format is FAT32 as well. When using USB disk to save data, we recommend that the

storage capacity should be less than 2GB and the users should enter system screen first

and then remove the USB disk. Follow this process can ensure that the data is saved

completely in USB disk.

There are two kinds of methods for removing the USB disk:

1. Press SYS button for 3 seconds to enter intro the system setting screen. Then, the

users could choose the function to remove the USB disk.

2. Create a “Remove storage” button on the screen first. After settings and compile

operation is completed, pressing this button is able to remove the USB disk. For more

information on “Remove storage” button, please refer to section 3.8.2.7 in Chapter 3.

Please use the above two methods to remove the USB disk to ensure that the data is saved

completely in USB disk.

Revision May, 2010 2-1