UHF Remote Control Antenna
Add a UHF Attenuator
Stray UHF signals can block signals from the remote control to the receiver. To prevent blocks, you can install a 10 dB attenuator. This will help keep out stray UHF signals, but also reduces how far away you can use the remote control. The attenuator is not supplied with this receiver.
1.Remove the UHF antenna from the UHF Remote Antenna input on the receiver back panel.
2.Attach a 10 dB attenuator to the UHF Remote Antenna input.
3.Attach the UHF antenna to the attenuator.
Page 19
