Chapter 3
Using the System
•Press the RECORD button to start recording on a VCR.
•Press the PAUSE button to pause a videotape or DVD. Press this button or the PLAY button to restart the videotape or DVD.
•Note: On some TVs, the presence of fixed images for extended periods of time may cause them to be permanently imprinted on the screen. Consult your TV user guide for information on whether this is a problem for your TV, what operating/viewing restrictions apply to avoid this problem, and associated TV warranty coverage.
Page Up and Page Down Buttons
Use the UP ARROW and DOWN ARROW buttons to change channels on a VCR.
Note: These buttons change the
Number Pad Buttons
•VCR - Use these buttons to enter channel numbers.
•DVD - Use these buttons to enter menu numbers.
Control a Tuner or Amplifier
Some of the features described below may not apply to your tuner or amplifier. See the device owner’s manual for details about the device’s features. If a remote control button is not described in this section, it does not work for a tuner or amplifier.
AUX Mode Button
To use the remote to operate a tuner or amplifier, first set up the remote to control the device as described on page 65, then press
the AUX mode button to set the remote to AUX mode. The AUX mode button’s backlight turns ON to show that the remote is set to AUX mode. Make sure to keep the remote in AUX mode to use the buttons as described in this section.
Power Button
Press the blank POWER button to turn the tuner or amplifier ON or OFF.
Page 70
