Chapter 2
Receiver Description and Installation
2.Use the Scan Analog selection to add the local channels to the Program Guide automatically or select the Add Analog option on the Local Channel Setup menu. This opens the Add Local Analog Channel menu.
3.Enter the channel number in the Ch. Num field.
Note: Be sure to enter two digits. For single digit numbers, place a zero in front of it.
4.To assign the channel to one of the major broadcast networks, select an Affiliation option. Or, select the None option if you do not want to assign the channel to a broadcast network.
5.To edit the name of the channel, select the Save option. This opens the Edit Local Channel Name menu:
6.Highlight a letter and press the SELECT/OK button.
7.Do this again to spell out the channel name. You can enter up to five characters. If you need to, use the SPACE option to insert a space or the <BACK option to correct a letter. When you are done entering the channel name, select the Save option. The receiver displays the Local Channel Setup menu again.
8.Repeat the above steps 3 through 7 if you want to add another local analog channel.
9.To delete one or more channel(s), select the channel(s) in the Channels list and then select the Remove option.
Page 28
