Quick Start Guide
After your system has been installed, order and watch your programming using the following steps:
Step 1: Ordering Your Programming
1.Using your remote control, press SAT, and then press the blank POWER button. Make sure the TV is also on.
2.Press GUIDE. You will see that some channels in the Program Guide appear in white. These channels can be viewed immediately. However, many channels will be in red. You cannot view these channels until you order programming.
3.Press the SYSTEM INFO button on the receiver's front panel to display the
System Info screen.
Note: The screen shown here is just an example. You will see numbers and information for your receiver.
4.Call the Customer Service Center at
5.Choose a package and the representative will authorize your programming.
6.Select Cancel to close the System Info screen.
Quick Start Guide
Tip: Channels that appear in red can’t be viewed because they are not part of your subscription. You can add channels to your subscription simply by calling DISH Network at
Page 3
Page 3
