Control Other Devices with the Remote

Instructions

Additional Information

7.Turn the device back on and try some other appropriate buttons to make sure they work.

8.Repeat this procedure until you’ve tried all the codes.

Press the POWER button to turn the device back on. Try some other buttons to make sure they work. Sometimes, the POWER button works when other buttons don’t.

You may need to repeat the scan to find the best code for your device.

Check the Device Codes

You can find out what device code you’ve set for each remote mode. In the following instructions, the column on the left contains the instructions and the column on the right provides additional information.

Instructions

Additional Information

1.Press and hold the appropriate mode button until all the other mode buttons light up, and then let go of the button. The mode button flashes.

2.Press the POUND (#) button twice.

Watch the mode light to determine your code. The mode button flashes the number for each digit of the device code, with a pause between the groups of flashes. A quick flash is for zero.

For AUX mode: The first group of flashes tells you what the AUX mode controls. A quick flash (zero) before the three-digit code is for a TV; one regular flash is for a VCR; and two flashes is for a tuner, or amplifier.

For Limited Mode: If you have programmed a TV or VCR in Limited Mode, the mode button flashes once at the end of the flash sequence.

For example, hold TV for a TV until all of the other mode buttons light. When you let go, TV will flash.

For example, if the code is 570, the mode button flashes five times, pauses, flashes seven times, pauses, and flashes once quickly.

For example, if the TV code is 570, the AUX mode button flashes once quickly (indicating 0 for TV), pauses, flashes five times, pauses, flashes seven times, pauses, and flashes once quickly.

For example, if the TV code is 570, the TV flashes five times, pauses, flashes seven times, pauses, flashes once quickly, and then flashes once (indicting Limited Mode).

Page 67

Page 67

Page 71
Image 71
Dish Network 138410, Solo 811 quick start Check the Device Codes