Installing the Receiver
When the software upgrade is complete, you will see a second message that the receiver's memory is now being programmed. This message may disappear and your screen may go blank for a few minutes. This is normal and does not indicate a problem with the receiver.
8.When the software upgrade is complete and the receiver resets itself, you should now be able to order your programming by calling
Setting the HDTV Resolution
When the receiver has been activated with qualifying DISH Network programming, use the following steps to select the desired HDTV format:
1.Consult your HDTV user’s guide for the HD format that the TV supports (1080i, 720p or 480p). If required, set up the HDTV to display in the format you desire. Some HDTV's will automatically adjust to the resolution setting of the receiver.
2.Press MENU
3.Select the HD format under TV type that matches the format your TV is set up to support. Press Save to save these settings.
4.If you were using the standard definition A/V input, switch your HDTV to display from its DVI or YPBPR component inputs. Consult your HDTV user guide for instructions.
5.Confirm you are watching picture from the receiver over the HDTV connections.
Page 23
