![](/images/new-backgrounds/1309010/309010121x1.webp)
Replacing a Rectifier
Step 2 – Pull out the rectifier
Rectifier cases may exceed 100ºC (212ºF), especially after prolonged operation. Use suitable gloves to remove the hot rectifier.
Grip the rectifier front panel with one hand as indicated by the arrows in the diagram below and slowly pull it out from the shelf, supporting the base of the rectifier with your other hand.
To avoid damage to the connector do not rest the rectifier on its connector, once it has been removed from the shelf.
Procedure complete
You must now insert a replacement rectifier into the empty slot (see page
Copyright © | ||
IPN | ||
|