Emerson PN 51-FCL-1056 instruction manual English, Free Chlorine, Ppm mg/L, Orp

QUICK START GUIDE

FOR FCL ANALYZER

1.Refer to Section 2.0 for installation instructions and Section 3.0 for wiring instructions.

2.Once connections are secured and verified, apply power to the analyzer.

3.When the analyzer is powered up for the first time, Quick Start screens appear. Using Quick Start is easy.

a.A backlit field shows the position of the cursor.

b.To move the cursor left or right, use the keys to the left or right of the ENTER key. To scroll up or down or to increase or decrease the value of a digit, use the keys above and below the ENTER key. Use the left and right keys to move the decimal point.

c.Press ENTER to store a setting. Press EXIT to leave without storing changes. Pressing EXIT also returns the display to the initial Quick Start screen.

d.A vertical black bar with a downward pointing arrow on the right side of the screen means there are more items to display. Continue scrolling down to display all the items. When you reach the bottom of the list, the arrow will point up.

Language

English

Francais

Espanol

Deutsch

4. Choose the desired language. Scroll down to display more choices.

S1 Measurement

Free Chlorine

pH Independ. Free Cl

Total Chlorine

Monochloramine

5. Choose free chlorine for sensor 1 (S1).

Units

ppm mg/L

S2 Measurement

pH

ORP

Redox

Ammonia

6. Choose the desired units for chlorine.

7.The screens shown in steps 7 through 9 appear only if you have an FCL-02. If you have an FCL-01, go to step 10. Otherwise, choose pH for sensor 2 (S2).

S2 Preamp

AnalyzerAnalyzer

Sensor/J Box

8.Choose Analyzer.