Emerson PN 51-FCL-1056 instruction manual Section Installation, Unpacking and Inspection

MODEL FCL-1056	SECTION 2.0
	INSTALLATION

SECTION 2.0.

INSTALLATION

2.1 UNPACKING AND INSPECTION

Inspect the shipping container. If it is damaged, contact the shipper immediately for instructions. Save the box. If there is no apparent damage, unpack the container. Be sure all items shown on the packing list are present. If items are missing, notify Rosemount Analytical immediately.

2.1.1 FCL-01 (free chlorine without continuous pH correction)

Model FCL-01 consists of the following items mounted on a back plate.

1.Model 1056-03-24-38-AN analyzer with sensor cable attached.

2.Constant head overflow sampler with flow cell for chlorine sensor.

The free chlorine sensor (Model 499ACL-01-54-VP), three membrane assemblies, and a bottle of electrolyte solution are in a separate package.

2.1.2 FCL-02 (free chlorine with continuous pH correction)

Model FCL-02 consists of the following items mounted on a back plate.

1.Model 1056-03-24-32-AN analyzer with sensor cables attached.

2.Constant head overflow sampler with flow cells for pH and chlorine sensors.

3.Stand to hold pH buffer solution during calibration.

The free chlorine sensor (Model 499ACL-01-54-VP), shipped with three membrane assemblies and a bottle of electrolyte solution, and the Model 3900VP-02-10 pH sensor, which replaces the older Model 399VP-09 sensor, are in separate packages.

5