❏For Windows XP, 2000, NT 4.0, or Server 2003, see "Using an additional driver" on page 136.

Setting the clients

❏For Windows Me or 98, see "With Windows Me or 98" on page 143.

❏For Windows XP or 2000, see "With Windows XP or 2000" on page 145.

❏For Windows NT 4.0, see "With Windows NT 4.0" on page 149.

Note:

❏When sharing the printer, be sure to set EPSON Status Monitor 3 so that the shared printer can be monitored on the print server. See "Setting Monitoring Preferences" on page 118.

❏When you are using shared printer in a Windows Me or 98 environment, on the server, double-click the Network icon in Control panel and make sure that the “File and printer sharing for Microsoft Networks” component is installed, then on the server and clients, make sure that the “IPX/SPX-compatible Protocol” or the “TCP/IP Protocol” is installed.

❏The print server and clients should be set on the same network system, and they should be under the same network management beforehand.

❏The screen may vary depending on your operating system version.

Setting up your printer as a shared printer

When the print server’s OS is Windows Me or 98 follow the steps below to set the print server.

1.Click Start, point to Settings, then click Control Panel.

134Using the Printer Software with Windows