Invalid N/W Module
There is no network program, or the network program cannot be used with your printer. Contact a qualified service representative.
Invalid P5C
The optional P5C Emulation Kit is installed, but the printer is in the B/W mode or 4 ⋅ B/W mode. When you use the optional P5C Emulation Kit, make sure that the printer is in the Color mode.
Invalid PS3
The PostScript3 ROM module is broken. Turn off the printer and contact your dealer.
Invalid ROM A
The printer cannot read the installed optional ROM module. Turn off the printer, then remove the ROM module.
A paper jam occurred because the wrong size paper has been loaded. Clear the jammed paper and set the paper size setting correctly. See "Clearing Jammed Paper" on page 345 to find how to clear the jammed paper.
Manual Feed ssss
The manual feed mode is specified for the current print job. Make sure the paper size indicated by ssss is loaded, then press the
NStart/Stop button.
Mem Overflow
The printer has insufficient memory to execute the current task. Press the N Start/Stop button on the control panel to resume printing, or press the + Cancel Job button to cancel the print job.
7
7
7
7
7
7
7
7
7
7
7
7
Using the Control Panel | 269 |