❏On the Device Settings sheet of the printer’s Properties dialog box, make sure that SEND CTRL-D Before Each Job and SEND CTRL-D After Each Job are set to No.

❏TBCP (Tagged binary communications protocol) cannot be used as the Output Protocol setting.

❏On the Job Settings sheet of the printer’s Properties dialog box, make sure to clear the Job Management On check box.

Using the PostScript Printer Driver with MacintoshInstalling the PostScript printer driver

Follow the steps below to install the PostScript printer driver.

Note:

Make sure that no applications are running on your Macintosh before installing the printer driver.

For Mac OS X users

Note:

Make sure that Printer Setup Utility (for Mac OS X 10.3) or Print Center (for Mac OS X 10.2) is not open.

1.Insert the printer software CD-ROM into your CD-ROM drive.

2.Double-click the CD-ROM icon.

3.Double-click Mac OS X, then double-click PS Installer.

214Using the PostScript Printer Driver