Reserve JobCanceled
The printer cannot store the data of your print job using the Reserve Job function. The maximum number of print jobs stored on the printer’s Hard Disk Drive has been reached, or the drive has no more memory available to store a new job. To store a new print job, delete a previously stored job. Also, if you have any Confidential Jobs stored, printing those jobs will make more memory available.
To clear this error, select Clear Warning from the control panel’s Reset Menu. For instruction about accessing the control panel menus, see "How to access the control panel menus" on page 223.
Reset
The printer’s current interface has been reset and the buffer has been cleared. However, other interfaces are still active and retain their settings and data.
Reset All
All printer settings have been reset to the default configuration, or to the last settings that were saved.
Reset to Save
A control panel menu setting was changed while the printer was printing. Press the N Start/Stop button to clear this message. The setting will become effective after printing has finished.
Alternatively you can clear this message by performing Reset or Reset All on the control panel. However, the print data will be deleted.
ROM CHECK
The printer is checking the ROM.
SELF TEST
7
7
7
7
7
7
7
7
7
7
7
7
Using the Control Panel | 275 |