The printer is offline. | Press the N Start/Stop button once to switch |
| the printer to ready status. |
|
|
Cause | What to do |
|
|
Your computer may not be properly | Perform the procedure illustrated in the |
connected to the printer. | Setup Guide. |
|
|
The interface cable may not be | Check both ends of the interface cable |
plugged in securely. | between the printer and the computer. If |
| you are using the parallel interface, be |
| sure to secure the connector using the |
| wire retaining clips. |
|
|
You may not be using the correct | If you are using the parallel interface, |
interface cable. | make sure that the cable is a |
| |
| cable no more than six feet in length. |
| If you are using the USB interface, use a |
| Revision 2.0 cable. |
|
|
Some error may have occurred. | Check the LCD panel to see if an error |
| message appears. |
|
|
The printer port is not set correctly in | Make sure that the printer port is set |
the printer driver. | correctly in the printer driver. |
|
|
Your application software is not | Make sure that the printer is selected in |
properly set up for your printer. | your application software. |
|
|
Your computer system’s memory is | Try reducing the image resolution of your |
too small to handle the volume of | document in the application software, or |
data in your document. | install more memory in your computer if |
| you can. |
|
|
Cause | What to do |
|
|
11
11
11
11
11
11
11
11
11
11
11
11
Troubleshooting 371