Note:

If the Assign to Paper Source check box is selected, the form name is displayed in the Paper Source drop-down list on the Basic Settings tab. You can also select the form without accessing the dialog box above.

6. Click OK to print the data.

Different printer settings overlay data

The overlay data is made with the current printer settings (such as Orientation:Portrait). If you want to make the same overlay with different printer settings (such as Landscape), follow the instructions below.

1.Re-access the printer driver as described in step 2 in "Creating an overlay" on page 83.

2.Make the printer settings and exit the printer driver.

3.Send the same data that you made by application to the printer like step 12 in "Creating an overlay" on page 83.

This setting is available only for Form Name data.

Using HDD form overlay

This function enables faster printing with form overlay data. Windows users can use the form data registered on the optional Hard Disk Drive installed in the printer though only an administrator can register or delete the form data on the Hard Disk Drive. You can access this function from the Form Selection dialog box in the printer driver.

Note:

❏This function is not available if the optional Hard Disk Drive is not installed.

88Using the Printer Software with Windows