6.When installation of the USB Device Driver is done, click

Finish.

7.Install the printer driver by following the on-screen instructions. See "Installing the PostScript printer driver for the parallel interface" on page 204 for details.

Installing the PostScript printer driver for the network interface

See the appropriate sections below according to your operating system, and follow the instructions to install the PostScript printer driver for the network interface.

Note:

❏Set the network settings before installing the printer driver. Refer to the Network Guide that comes with your printer for details.

❏Turn off all virus protection programs before installing the printer software.

For Windows XP or 2000 users

1.Make sure that the printer is turned on. Insert the printer software CD-ROM into your CD-ROM drive.

2.For Windows 2000, Me, 98, or NT 4.0, click Start, point to Settings, and click Printers. Then double-click the Add Printer icon.

For Windows XP, click Start, point to Printer and Faxes, and click Add a printer in the Printer Tasks menu.

3.The Add Printer Wizard appears. Then click Next.

4.Select Local printer, then click Next.

208Using the PostScript Printer Driver