Loading a custom paper size

You can load non-standard size paper (98 ⋅ 148 mm to 216 ⋅ 297

mm)into the MP tray as long as it meets the following size requirements:

When loading a custom paper size, you should make paper settings as shown below:

❏Make settings on the Basic Settings in the printer driver.

Paper Size:

User Defined Size

Paper Source:MP Tray (up to 16.5 mm thick stack)

Paper Type:

Plain or Thick

Note:

❏For Windows, access the printer driver, then select User-Defined Size from the Paper Size list on the Basic Settings tab. In the User Defined Paper Size dialog box, adjust the Paper Width, Paper Length, and Unit settings to match your custom paper. Then click OK and your custom paper size will be saved.

❏For Macintosh, access the printer driver, click Custom Size in the Paper Setting dialog box. Then click New, adjust the Paper Width, Paper Length, and Margin settings to match your custom paper. Then enter the setting’s name, and click OK to save your custom paper size.

❏You can also make these settings on the Tray Menu in the control panel. See "Tray Menu" on page 229.

64Paper Handling