Adjust the density of the printing for back side of normal paper. The setting becomes darker as the value increases.

Thick

Adjust the density for thick paper. The setting becomes darker as the value increases.

Trnsprnc

Adjust the density for transparencies. The setting becomes darker as the value increases.

Envelope

Adjust the density for envelopes. The setting becomes darker as the value increases.

Highland

Prevents printing defects caused by abnormal electric discharge that may occur when using the printer in locations at high altitudes. Select 1 when using the printer in locations at high altitudes.

Feed Offset

Adjust the vertical position in which to start printing. The position moves lower on the sheet as the value increases. This setting is used when doing single-sided printing or printing the first page for duplex printing.

Scan Offset

Adjust the horizontal position in which to start printing. The position moves to the right of the sheet as the value increases. This setting is used when doing single-sided printing or printing the first page for duplex printing.

7

7

7

7

7

7

7

7

7

7

7

7

Using the Control Panel

261