There is insufficient memory to print the page at the specified print quality. The printer automatically lowers the print quality so that it can continue printing. If the quality of the printout is not acceptable, try simplifying the page by limiting the number of graphics or reducing the number and size of fonts.
To clear this error, select Clear Warning from the control panel’s Reset Menu. See "How to access the control panel menus" on page 223 for instructions.
Turn the Image Optimum setting off on the control panel’s Printing Menu if you do not want the printer to automatically lower the print quality to continue printing.
You may need to increase the amount of printer memory to be able to print at the desired print quality for your document. For more information on adding memory, see "Memory Module" on page 303.
Install Fuser
There is no fuser unit installed or the fuser unit is not installed properly. Turn off the printer, then install the fuser unit if it is not installed.
If a fuser unit is already installed, turn the printer off and reinstall the unit after it has cooled off (30 minutes). Open covers A and B. Remove the fuser unit, then reinstall it properly. Close covers A and B. The error clears automatically if the fuser unit is properly installed.
If the error is not cleared, the fuser unit is out of order. Replace it with a new fuser unit.
Install Photoconductor
There is no photoconductor unit installed or the photoconductor unit is not installed properly. Turn off the printer and install the photoconductor unit if it is not installed.
7
7
7
7
7
7
7
7
7
7
7
7
Using the Control Panel | 267 |