Note:
❏You need an optional Hard Disk Drive installed in your printer in order to use the Reserve Job function. Make sure that the drive is correctly recognized by the printer driver before you start using the Reserve Job function.
❏The Reserve Job function cannot be used when you are printing using the AppleTalk protocol in Windows 2000 or NT 4.0.
❏Make sure to clear the Job Management On check box on the Job Settings sheet when outputting data as a PS file. The Job Management check box is selected by default so that the job information is attached to the print data when it is sent to the printer.
Follow the steps below to use the Reserve Job function when printing from any application.
1.Click Print from the application’s File menu.
2.Click Properties, then click the Job Settings tab.
3.Specify the desired Reserve Job settings in the dialog box that appears.
4.When printing multiple copies, select the Collated check box in the Advanced settings of the printer driver.
5.When you are done with the settings, then click Print.
Using AppleTalk under Windows 2000 or NT 4.0Use the following settings if your machine is running Windows 2000 or NT 4.0, and the printer is connected through an network interface using the AppleTalk protocol:
❏Use SelecType to set the Emulation
6
6
6
6
6
6
6
6
6
6
6
6
Using the PostScript Printer Driver | 213 |