The printer does not print normally via the parallel interface (Windows 98 only)
Cause | What to do |
|
|
The computer is connected to the | Make sure that the mode setting is |
printer via the parallel interface and | correct. |
the parallel port setting is set to the |
|
ECP mode. |
|
|
|
Cause | What to do | |
|
| |
For Windows users only | The printer cannot print binary data when it | |
The Data Format setting in the | is connected to the computer via the USB | |
interface. Make sure that the Data Format | ||
printer’s Properties is not set to | ||
setting, which is accessed by clicking | ||
ASCII or TBCP. | ||
Advanced on the PostScript sheet of the | ||
| ||
| printer’s Properties, is set to ASCII or TBCP. | |
| If your computer is running Windows XP, | |
| click the Device Settings tab in the printer’s | |
| Properties, then click the Output Protocol | |
| setting and select ASCII or TBCP. | |
|
| |
For Macintosh users only | The printer cannot print binary data when it | |
The Data Format setting in the | is connected to the computer via the USB | |
interface. Make sure that the Data Format | ||
printer’s Properties is not set to | ||
setting, which is accessed by clicking Print | ||
ASCII. | ||
from the File menu, is set to ASCII. | ||
| ||
|
|
398Troubleshooting