You can load up to 16.5 mm thick stack of labels into the MP tray at a time. However, you may need to feed some labels one sheet at a time, or load them manually.
Note:
❏Duplex printing is not available for labels.
❏Depending on the quality of labels, the printing environment, or the printing procedure, labels might be wrinkled. Make a trial print run before you print on a lot of labels.
When loading labels, you should make paper settings as shown below:
❏Make settings on the Basic Settings in the printer driver.
Paper Size: | A4 or LT |
Paper Source: | MP Tray (up to 50 sheets) |
Paper Type: | Labels |
❏You can also make these settings on the Tray Menu in the control panel. See "Tray Menu" on page 229.
Note:
❏You should only use labels designed for laser printers or
❏To prevent the label adhesive from coming into contact with printer parts, always use labels that completely cover the backing sheet, with no gaps between the individual labels.
❏Press a sheet of paper on top of each sheet of labels. If the paper sticks, do not use those labels in your printer.
62Paper Handling