Print Overrun
The required time to process the print data exceeded the print engine speed because the current page is too complex. Press the
NStart/Stop button to resume printing, or press the + Cancel Job button to cancel the print job. If this message appears again, select On as the Page Protect setting in the control panel’s Setup Menu or select Avoid Page Error on the printer driver.
If you continue to receive this message when printing a particular page, try simplifying the page by limiting the number of graphics or reducing the number and size of fonts.
To avoid this error, it is recommended that you set the Page Protect setting to On and add more memory to the printer. See "Setup Menu" on page 233 and "Memory Module" on page 303 for details.
PS3 Hard Disk full
The memory allocated for writing PostScript 3 commands on the optional Hard Disk Drive is full.
To clear this error, select Clear Warning from the control panel’s Reset Menu, or remove the downloaded PS fonts to make room on the Hard Disk Drive. For instruction about accessing the control panel menus, see "How to access the control panel menus" on page 223.
RAM CHECK
The printer is checking the RAM.
Ready
The printer is ready to receive data and print.
Remove Toner
7
7
7
7
7
7
7
7
7
7
7
7
Using the Control Panel | 273 |