Feed Offset2

Adjust the vertical position in which to star printing. The position moves lower on the sheet as the value increases. This setting is used when printing the printing on the backside of paper for duplex printing.

Scan Offset2

Adjust the horizontal position in which to start printing. The position moves to the right of the sheet as the value increases. This setting is used when printing on the backside of paper for duplex printing.

Status and Error Messages

This section contains a list of error messages shown on the LCD panel, giving a brief description of each message and suggestions for correcting the problem. Note that not every message shown on the LCD panel indicates a problem. When the mark is displayed at the left of the warning message, multiple warnings occur. To confirm all warnings that occur, press the d Down button to display the Status Menu, then press the Enter button. The LCD panel also displays the amounts of remaining toners and available paper sizes.

Calibrating Printer

The printer automatically calibrates itself. This is not an error message, and will clear itself after the calibration process has finished. While the printer displays this message, do not open the covers or turn off the printer.

Cancel All Print Job

262Using the Control Panel