7.Select the printer, then click Next.

8.For Windows Me or 98, select LPT1 as the port the printer is connected to, then click Next.

For Windows XP, 2000, or NT 4.0, go to the next step.

9.Follow the on-screen instructions for the rest of the installation.

10.When installation is done, click Finish.

Installing the PostScript printer driver for the USB interface

Follow the steps below to install the PostScript printer driver for the USB interface.

cCaution:

Never use EPSON Status Monitor 3 and PostScript 3 driver at the same time when the printer is connected via USB port. It may damage the system.

Note:

❏The USB interface is not available for printing under Windows NT 4.0.

❏For Windows Me or 98, if the Windows driver and the Adobe PS driver for Epson printers with a USB connection have already been installed on your computer, follow the installation procedure "Installing the PostScript printer driver for the parallel interface" on page 204, but make sure to select USB as the port in step 5. If you have not installed an Epson USB printer driver on your computer, follow the installation procedure below.

❏Installing the printer software for Windows XP or 2000 may require administrator privileges. If you have problems, ask your administrator for more information.

206Using the PostScript Printer Driver