Note:
Do not select the Automatically detect and install my Plug and Play printer check box.
5.Select the Create a new port check box and select Standard TCP/IP Port from the
6.Click Next to continue.
7.Specify the IP address and port name, then click Next.
8.Click Finish.
9.Click Have Disk in the Add Printer Wizard and specify the following path for the
D:\ADOBEPS\ENGLISH\WIN2K_XP\PS_SETUP. Then click OK.
Note:
Change the drive letter as needed for your system.
10.Select the printer and click Next.
11.Follow the
12.When installation is done, click Finish.
For Windows Me or 98 users
1.Install the EpsonNet Print. Refer to “Installing EpsonNet Print” in the Network Guide to find the instructions.
2.Install the printer driver. See "Installing the PostScript printer driver for the parallel interface" on page 204 for details.
6
6
6
6
6
6
6
6
6
6
6
6
Using the PostScript Printer Driver | 209 |