❏Be careful not to touch the fuser, which is marked CAUTION HIGH TEMPERATURE, or the surrounding areas. If the printer has been in use, the fuser and the surrounding areas may be very hot. If you must touch one of these areas, wait 30 minutes to allow the heat to subside before doing so.
1
2
1.Do not insert your hand deep into the fuser unit.
2.CAUTION HIGH TEMPERATURE
❏Do not insert your hand deep into the fuser unit as some components are sharp and may cause injury.
❏Avoid touching the components inside the printer unless instructed to do so in this guide.
❏Never force the printer’s components into place. Although the printer is designed to be sturdy, rough handling can damage it.
❏When handling a toner cartridge, always place it on a clean, smooth surface.
Safety Instructions | 5 |