wWarning:
Be careful not to touch the fuser, which is marked CAUTION HIGH TEMPERATURE, or the surrounding areas. If the printer has been in use, the fuser and the surrounding areas may be very hot. If you must touch one of these areas, open cover A and B, then wait 30 minutes to allow the heat to subside before doing so.
If you can remove the paper, close covers B and A. If you cannot remove the paper, go to the next step.
7.Turn the handles on both sides of the fuser unit to unlock them.
wWarning:
Be careful not to touch the fuser, which is marked CAUTION HIGH TEMPERATURE, or the surrounding areas. If the printer has been in use, the fuser and the surrounding areas may be very hot. If you must touch one of these areas, open cover A and B, then wait 30 minutes to allow the heat to subside before doing so.
11
11
11
11
11
11
11
11
11
11
11
11
Troubleshooting 353