Changing the settings in the default-setting mode

The following table shows the basic function of each button in the default-setting mode.

Button

Basic function

 

 

ItemU (Font) button

Selects the previous menu parameter.

 

 

ItemD (Pitch) button

Selects the next menu parameter.

 

 

SetU (Tear Off) button

Select the previous value in the selected menu.

 

 

SetD (Top of Form)

Select the next value in the selected menu.

button

 

 

 

Follow these steps to enter the default-setting mode and change the settings:

Note:

If you turn off the printer prior to exiting the default-setting mode, settings that you have set up until you turn off the printer are saved.

1.Make sure paper is loaded and turn off the printer.

c Caution:

Whenever you turn off the printer, wait at least five seconds before turning it back on; otherwise, you may damage the printer.

2.Turn on the printer while holding down the Font button to enter the default-setting mode. The message Setting mode appears on the LCD panel.

Note:

The instructions and current settings are printed out in the language that you set in the SelecType mode. If you want to change the language, change the language setting in the SelecType mode. See “Changing the settings in the SelecType mode” on page 98 for details.

4

4

4

4

4

4

4

4

4

4

4

4

Control Panel

101