Low-noise mode

When this mode is set to On, the noise is reduced, but the printing speed is slower.

Auto cut mode

This function is available only when the optional perforation cutter (#C81570X) is installed in the printer. When this setting is set to On, the perforation cutter cuts each page at the perforation automatically. Note the following when you turn on this functions:

❏Make sure the paper is at least 4 inches long.

❏Do not change the top of form position using the Top of Form button.

❏Do not feed the paper using the Micro Feed buttons.

❏Never cut labels, continuous paper with labels, and overlapping multi-part forms.

❏If you set the cutting method through the printer driver’s paper source setting, it overrides Auto cut mode.

Auto cut/back mode

This function is available only when the optional perforation cutter (#C81570X) is installed in the printer. When you turn on this feature, the printer automatically cuts each page at the perforation and feeds the paper to the top-of-form position while it is printing.

Overlapping multipart forms

When this setting is set to On, you can print on overlapping multi-part forms that vary in thickness.

4

4

4

4

4

4

4

4

4

4

4

4

Control Panel

95