2.Make sure paper is loaded on the front tractor to the top-of-form position. If paper is already loaded on the tractor but it is in the standby position, press the Front/Rear or LF/FF Load button (depending on which tractor is selected) to load the paper to the top-of-form position. (If no paper is loaded on the front tractor, load paper. See “Loading Paper onto the Front Tractor” on page 13 for instructions.)

3.Once you have paper loaded on the printer’s front tractor, use the LF/FF Load button to advance the paper to the pull tractor.

4.Release both sprocket lock levers on the pull tractor by pulling them toward you. Then open both sprocket covers.

5. Adjust the sprockets to match the width of your paper.

6

6

6

6

6

6

6

6

6

6

6

6

Options and Consumables

139