cCaution:
Never replace the print head yourself; you may damage the printer. Also, other parts of the printer must be checked when the print head is replaced.
All the text is printed on the same line.
Cause | What to do |
|
|
No line feed command is sent at the end of each line of text.
Turn on the auto line feed setting using the printer’s
The printout has extra blank lines between lines of text.
Cause | What to do |
|
|
Two line feed commands are | Turn off the auto line feed setting using |
being sent at the end of each | the printer’s SelecType mode. See |
line of text, because the | |
printer’s auto line feed setting | mode” on page 98 for details. |
is on. |
|
|
|
The line space setting in your | Adjust the line space setting in your |
application software is | application software. |
incorrect. |
|
The printer prints strange symbols, incorrect fonts, or other inappropriate characters.
Cause | What to do |
|
|
Your printer and computer are not communicating correctly.
Make sure that you use the correct interface cable and that the communications protocol is correct. See “Electronic” on page 168 and your computer documentation.
118Problem Solver