Print Server

You can use this printer as a network printer by installing a print server in the printer’s parallel interface port. See the Administrator’s Manual packaged with this option for instructions on installation and use.

The following Printer Servers can be used:

❏EpsonNet 10/100 Base Tx Int. Print Server 3 (C82435✼)

Setting the IP address from the control panel

Follow the steps below to get the IP address using the control panel.

1.Turn on the printer.

2.Press the Menu (Tear Off and Top of Form) buttons to enter the SelecType mode.

3.Press the ItemU (Font) or ItemD (Pitch) button to select the Get IP address setting and set the setting to Panel using the

SetU (Tear Off) or SetD (Top of Form) button.

4.Press the ItemD (Pitch) button to select the IP byte 1.

5.Change the number for the IP byte 1 using the SetU (Tear Off) or SetD (Top of Form) button.

6.Press the ItemD (Pitch) button to select the next byte and change the number using the SetU (Tear Off) or SetD (Top of Form) button.

7.Repeat step 6 until the number for the IP byte 4 is set.

6

6

6

6

6

6

6

6

6

6

6

6

Options and Consumables

161