If you are using multi-part forms or labels, you may want to use the optional pull tractor. See “Using the Pull Tractor” on page 135 for details.
cCaution:
When printing on labels, be absolutely sure that your printing stays within the printable area of the label to prevent damage to the print head. See “Paper” on page 171 for more information on the printable area.
Using multi-part formsYou can use multi-part (carbonless or carbon-backed) forms with up to seven sheets, including the original, on the rear tractor. On the front tractor, you can use forms with up to ten sheets.
You load continuous multi-part forms the same way you load any other type of continuous paper. Before loading multi-part forms, however, make sure the paper has a clean straight edge and does not separate or tear apart. See “Loading Paper onto the Front Tractor” on page 13 or “Loading Paper onto the Rear Tractor” on page 20 for instructions.
