iTop of Form (SetD) button

❏Enters the top-of-form position mode and sets the new top-of-form position after it has been adjusted with the Micro Feed buttons.

❏When the printer enters the SelecType mode and default setting mode, the button works as the SetD button. You can press the SetD button to select the next value of a setting item. See “Changing the printer’s settings” on page 98 for details.

Top of Form light

On when the printer is in the top-of-form and tear-off modes.

jLF/FF Load button

❏Loads continuous paper when the printer is out of paper.

❏Feeds paper line by line when pressed briefly.

❏Advances continuous paper to the next top-of-form position when held down for a few seconds.

kMicro Feed buttons

Adjust the paper position, such as the top-of-form position and tear-off position.

4

4

4

4

4

4

4

4

4

4

4

4

Control Panel

85