If you plan to load continuous paper from the rear tractor, be sure to leave enough room around the printer for the attached perforated paper output attachment and the output tray, and for the stack of fresh paper. Make sure you align your paper supply with the paper loaded in the tractor so the paper feeds smoothly into the printer.

The following illustration shows a way to position your paper with the rear tractor loaded.

Installing the perforation cutter

The steps below show you how to install the perforation cutter. You will need a cross-head screwdriver.

Note:

If you plan to use the perforation cutter with the built-in rear tractor, you need to load paper onto the rear tractor before you install the perforation cutter. See “Loading Paper onto the Rear Tractor” on page 20 for instructions.

146Options and Consumables