Wrong tear-off position

The printer prints on (or too far away from) the perforation of your continuous paper.

Cause

What to do

 

 

The tear-off position setting is incorrect.

Adjust the tear-off position using the buttons on the control panel. See “Adjusting the top-of-form position” on page 27 for details.

The printer you want to use is

Choose the correct printer from the

not selected in your software.

Windows desktop or in your application

 

before printing.

 

 

The paper size setting in your

Check the paper size setting in your

application or printer driver

application or printer driver.

does not match the size of the

 

paper you are using.

 

The printer’s page length settings for the front or rear tractor do not match the size of the paper you are using.

Check the page length settings for the front or rear tractor using the printer’s SelecType mode. See “Changing the settings in the SelecType mode” on page 98 for details.

114Problem Solver